J-Boats

J24 Spinnaker Pole

We have developed a great product in our carbon double-tapered spinnaker pole. And we gave 3 away at the 2012 J24 Worlds to help support the fleet. Price includes end fittings. Alternatively available painted white as a cost option.

Spinnaker pole also available as a bare tube.

 

 

 

 

 

Click Here for Price        Post Feedback


J24 Rudder

We have developed a J24 rudder based on the published class rules. At this time we must stress that the rudder has not been approved as a replacement for one-design racing.

Click Here for Price         Post Feedback


J24 Rudder Template

A durable fiberglass template milled on our CNC machine to the datapoints published for the J24 rudder.

Click Here for Price         Post Feedback


J30 Rudder

Our rudders are the right shape, the right weight, and the right price.   And approved for One Design racing by the J/30 Class Association.

If you look in our Gallery you may also see a cool clear coat carbon tiller we built for a local J30.

    

Click Here for Price         Post Feedback

Earlier this year, I discovered that my J/30 rudder was thicker and heavier than the class specification. 

This past Spring, I installed a new rudder made by Competition Composites and am very happy with the difference that it has made. The key difference is that the new foil stays responsive in all wind conditions. Specifically, in higher winds, there is no sense that the rudder is becoming inefficient and heavy. The Class Spec won’t allow a balanced rudder, so you can’t achieve the super-light touch available on some tillers, but having one that is correctly designed makes a BIG difference. 

The guys that own CCI sail at my Club and I can attest that they understand racing. They were quick and responsive. And the product was ready when promised. And fit right in to the hole that the old one left behind. 

The new rudder is substantially better. Worth, in my opinion, the investment. You’d spend as much or more on a new sail and, for the reasons above, I would argue you will get more of a return from your investment on the race course out of the rudder. 
– Corey G


J30 Balanced Rudder

A customer who is offshore racing his J30 wanted a balanced rudder, built in carbon. We were happy to provide this for him. The helming effort has been significantly decreased, while keeping the wetted shape otherwise the same to avoid a rating penalty.

We also built an emergency rudder for him.

Click Here for Price         Post Feedback

Just wanted to thank you very much for the outstanding offshore rudder you built for my 1979 J/30. The rudder performed flawlessly, after over 2100 NM racing from SF to Hawaii in Pacific Cup 2010. We finished 2nd in Div. A just under 14 days and missed 1st place by approximately 45 minutes. We were in near constant surf condition the last 2/3 of the race with a top speed of 16.1 knots and a best 24 hour run of 198 NM. The weather included squalls and trade winds with TWS of 12- 29 knots at times planning at 14- 16 knots. 
The greatest sailing I have ever experienced, thanks again for being a part of “Team Friction Loss”. 
– Shawn


J30 Rudder Template

A durable fiberglass template milled on our CNC machine to the datapoints published for the J30 rudder.

Click Here for Price         Post Feedback


J35 Spinnaker Pole

Our J35 spinnaker pole is a 3.1″ OD carbon fiber tube of maximum allowed length.  Includes end fittings.

 Female molded and pressure cured in our autoclave for better mechanical properties than mandrel wound tubes.

J35 spinnaker pole

Click Here for Price         Post Feedback


J42 Rudder

A customer sent in his badly damaged J42 rudder for replacement. Using our recent J44 design as a starting point, we built a rudder that matches the original rudder geometry while using lighter and stronger materials.

Price is for rudder blade only. Replacement post quoted separately

Click Here for Price         Post Feedback

 


J44 Rudder

A customer sent us what was left of his OEM rudder after having his post snap clean in half. We reverse engineered and updated the rudder using modern lightweight materials including high density foam cores and a carbon fiber post. Our replacement is much lighter and stronger than the original.

     

Price is for rudder blade only. Replacement post quoted separately

Click Here for Price         Post Feedback

 


J90 Rudder

There weren’t many J-90s built, but we had a customer come to us to draw and fabricate a new rudder for him. A deep high-aspect ratio design, with carbon fiber rudder post.

Price is for rudder blade only. Replacement post quoted separately

Click Here for Price         Post Feedback

 


J105 Rudder

This J105 Rudder was build around the customers original post based on drawings and measurements of the original rudder. Interested in a new carbon fibre post? We can build that as well, just ask!

Price is for rudder blade only. Replacement post quoted separately

Click Here for Price         Post Feedback

 


J109 E-Rudder

Description coming soon.

  

Click Here for Price         Post Feedback

 


J111 Rudder

We are proud to be suppliers to J-Boats for the J111 rudders. Please contact them directly should you require a replacement.

Post Feedback

 


J145 Rudder

This J145 Rudder was build around the customers original post based on measurements of the original rudder. If you need a new post as well we can provide a custom carbon fibre replacement.

Price is for rudder blade only. Replacement post quoted separately

Click Here for Price         Post Feedback