As a specialist in one-off and short run production composite products, CCI is your preferred supplier for radomes, antenna shrouds, and similar items such as sonar fairings.  Especially if the solution you need is not sitting on a shelf somewhere.

We can manufacture radomes in either cored sandwich construction or single skin composite.  We can even fabricate high quality replacement panels to suit existing radomes from other suppliers.

Our larger cored radomes feature an innovative panel joint that minimizes RF Scattering.   Please contact us to discuss your needs.   A few case studies that showcase our capabilities are described below.

White Paper

Read our high level overview of composite radomes by clicking here

Case Studies

We have built several varieties of radomes for customers in the communications industry. This example is a cored radome 10 feet in diameter and intended for rooftop mounting.  Built using vacuum resin infusion techniques for the highest quality.

Request a quote

Cored Radome    
honeywell-radomes-gallery-1    honeywell-radomes-gallery-2


We were chosen by a local antenna company to develop fiberglass radomes with fiberglass and foam core backing plates for pole mounting. These composite backing plates weigh a small fraction of that of their steel counterparts.

tiltek_radome_Gallery_1    tiltek_radome_Gallery_2


We have done a series of short production runs of fairings that fit submersed towed sonar equipment.   We developed the tooling based on drawings of the equipment that it had to fit around.

knudson_fairing_Gallery1   knudson_fairing_Gallery2


Below is a rendering of a solution we drew to house a rotating boom antennae mounted high on a tower and subject to substantial wind loads. Diameter of rotation is 8 feet (2.4m).